Current status and future plan for thermaI striping investigations at JNC

; kasahara, Naoto; ; ; Kamide, Hideki

JNC TN9400 2000-010, 168 Pages, 2000/02

JNC-TN9400-2000-010.pdf:8.78MB

Thermal striping is significant issue of the structural integrity, where the hot and cold fluids give high cycle fatigue to the structure through the thermal stress resulted from the time change of temperatur distibution in the structure. In the sodium cooled fast reactor, temperature change in fluid easily transfers to the structure because of the high thermal conductivity of the sodium. It means that we have to take care of thermal striping, The thermal striping is complex phenomena between the fluid and structure engineering fields. The investigations of thermal striping are not enough to evaluate the integrity directly. That is the fluctuation intensity at the structure surface is assumed to be temperature difference between source fluids (upstream to the mixing region) as the maximum value in the design. 0therwise, the design conditions are defined by using a mockup experiment and large margin of temperature fluctuation intensity. Furthermore, such evaluation manners have not yet been considered as a design rule. Transfer mechanism of temperature fluctuation from fluid to structure has been investigated by the authors on the view points of the fluid and structure. Attenuation of temperature fluctuation was recognized as a dominant factor of thermal fatigue. We have devdoped a numerical analysis system which can evaluate thermal fatigue and crack growth with consideration of the attenuation of temperature fluctuation in fluid, heat transfer, and structure. This system was applied to a real reactor and the applicability was confirmed. Further verification is planned to generalize the system. For the higher cost performance of the fast reactor, an evaluation rule is needed, which can estimate thermal loading with attenuation and can be applied to the design. An idea of the rule is proposed here. Two methods should be prepared; one is a precise evaluation method where mechanism of attenuation is modeled, and the other is simple evaluation method where ...

None

PNC TJ1609 95-002, 34 Pages, 1995/02

PNC-TJ1609-95-002.pdf:1.06MB

no abstracts in English